Description
F4U-4 Corsair 1100mm
Arrows Hobby F4U Corsair PNP with Retracts (1100mm) (ARR008P)
Entirely practical, with an outstanding performance, this 1100mm span 3S version of the famous carrier fighter is destined only to win hearts.
If there’s one thing we guarantee you’ll do when you get your hands on the new Arrows Hobby Vought Corsair, it’s fly, and fly lots. Authentic, docile and eminently practical, the new 1100mm F4U not only looks the part, its confidence-inspiring flying characteristics and minimal preparation time will have you reaching for it time and time again.
Presented in the colour scheme of the F4U flown by Vance ‘Bud’ Yount while aboard USS Badoeng Strait during the Korean War this one really is easy on the eye with an abundance of scale detail. Clock the crisply detailed dummy Pratt & Whitney radial, the four-blade Hamilton Standard propeller, slick airbrake-equipped twist ‘n’ turn retracts, scale pilot figure, working landing and navigation lights, flaps, drop tanks, arrestor hook, detailed tail wheel and panel lines, to mention but a few.
Designed for a standard 3S 2200mAh LiPo and basic 6-channel R/C the F4U’s 850KV brushless motor and 40A ESC combo offers a hugely satisfying vertical performance that’ll have you grinning from ear to ear as you scribe large warbird loops over the patch. Go on, treat yourself.
Key Features:
- 3536 850KV brushless motor and 40A ESC
- High power-to-weight ratio
- Suits standard 3S 11.1V 2200mAh 25C LiPo
- Oversized battery compartment to suit a multitude of battery sizes and capacities
- Seven pre-installed high quality servos
- Flap-equipped
- Authentic twist and turn retracts
- Highly durable EPO airframe
- Easy assembly
- Water-based paint
- Realistic 4-blade propeller
- Removable LiPo battery tray for quick changes
- Superb scale detailing
- Takes standard 6-channel radio
What’s in the Box:
- 1x Factory assembled and painted fuselage with decals applied
- 1x Factory assembled and painted 1-piece wing with decals applied
- 1x Factory assembled and painted tail set with decals applied
- 1x Pre-installed 3536 850KV motor
- 1x Pre-installed 40A ESC with XT60 connector
- 1x Set of pre-installed twist and turn electric retracts
- 1x Scale 4-blade propeller
- 1x Elevator spar
- 1x Screw and pushrod set
- 1x Instruction manual
- 7x Pre-installed high quality servos
Needed to Complete:
- 6-channel transmitter and receiver combo
- 3S 2200mAh LiPo
- 3S compatible LiPo balance charger
SPECIFICATIONS:
- Wingspan-1100mm (43.3in)
- Length-880mm (34.6in)
- Flying Weight-Around 1260g
- CG (Center of Gravity)-60mm from leading edge
- Power System-3536-850kV
- Electronic Speed Control-40A
- Propeller / EDF-10.5 x 8
- Servos-9 gram servo x 6
- Landing Gear-Electronic rotating retractable main gear
- Required Battery-3S 2200mAh LiPo required
- Required Radio-6 Channel transmitter and receiver required
- Ailerons-Yes
- Elevator-Yes
- Rudder-Yes
- Flaps-Yes
- Lights-Yes
- Hinge Type-Foam
- Material-EPO Foam
- Skill Level-Intermediate
- Build Time-1-2 Hours
- Recommended Environment-Outdoor, 100 foot paved runway or short manicured grass
Reviews
There are no reviews yet.