Description

Hitec  D-980TW

32-Bit, Monster Torque, Titanium Gear Servo

Features

• Programmable PWM Digital Amplifier
• 32-Bit MCU with 12-Bit ADC Circuitry
• 4096 Resolution
• 1M Cycle Long Life Potentiometer
• Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
• Dual Ball Bearing Supported Output Shaft
• 25-Tooth Output Spline
• Coreless Metal Brush Motors
• Nylon Reinforced Plastic Upper and Lower Case
• Diamond Cut Aluminum Heat Sink Center Case
• Dust Resistant and Splash Proof Case

Programmable Functions

• End Point Adjustments
• Direction
• Fail Safe
• Dead Band
• Speed (Slower)
• Soft Start Rate
• Overload Protection
• Data Save / Load
• Program Reset

Accessories

• Titanium Gears Set | Link |
• Metal / Karbonite 1st Gear Set | Link |
• Plastic / Aluminum Case Set | Link |
• Applicable Horns | Link 1 • 2 • 3 • 4 • 5 |

D980TW Servo Specifications

Performance Specifications
Operating Voltage Range (Volts DC)	4.8V ~ 6.0V ~ 7.4V
Speed (Second @ 60°)	0.28 ~ 0.21 ~ 0.17
Maximum Torque Range oz. / in.	361 ~ 500 ~ 611
Maximum Torque Range kg. / cm.	26.0 ~ 36.0 ~ 44.0
Current Draw at Idle	30 mA
No Load Operating Current Draw	500 mA
Stall Current Draw	6,200 mA
Dead Band Width	1 µs
Physical Specifications
Dimensions (Inches)	1.72 x 0.88 x 1.57
Dimensions (Metric)	43.8 x 22.4 x 40.0
Weight (Ounces)	2.76
Weight (Gram)	79.0
Circuit Type	32bit Programable Digital
Motor Type	Coreless Metal Brush
Gear Material	Titanium
Bearing Type	Dual Ball Bearing
Output Shaft (type / Ømm)	H25T
Case Material	Plastic / Aluminum
Dust / Water Resistance	Splash Proof
Connector Gauge (AWG) / Strand Count	20 / 80
Radio Control Applications
Parkflyer	N / A
Sport Plane	> 40%
Sailplane	2 meter and up
3D Performance	> 40%
Scale	> 40%
Electric Helicopter	N / A
Gas Helicopter	N / A
On Road	N / A
Monster Truck	N / A
Buggies	N / A
Truggies	N / A
Short Course / Truck	N / A
Crawlers	Super
Sail Boat	= >1 meter & Scale
Power Boat	1/5th