74″ Slick 580 EXP

د.إ2,350.00

+5% Vat

Description

74″ Slick 580 EXP

Using design and construction technology from Jase Dussia’s 120CC Slick 580 EXP, the 74″ features a new generation of light, strong EXP construction. We’ve radically expanded the use of composites, drawing on our experience from 120CC, which has allowed us to create a highly styled appearance along with very light weight.

For gasoline power, we recommend the 35cc engine

For electric power, we recommend the XPWR 30CC brushless outrunner motor and an 80-120 amp HV ESC, providing approximately 3000-3200 watts. Our choice is the Castle Creations Edge series. The 74″ Slick 580 airframe is equipped with a custom mounting location for the Edge controllers. With the XPWR 30CC, we recommend 12S 3000-3700mah lipo batteries and a 19×8, 19×10, or 20×8 electric prop.

 

 

 

Product Information

Specifications

Wingspan: 74 inches
Length: 71.5 inches with spinner
Width of elevator/stabilizer: 30 inches
Height of the rudder sitting on the tailwheel: 19 inches
Wing area: 1070 square inches
Weight: 10.5-11 lbs.

 

Gas Power System

35cc
12-14 oz. FlowMaster fuel tank
EF Fuel Dot

 

Electric Power System

Xpwr 30cc electric motor
Castle Creations Edge HV-80 electronic speed control
19 x 8, 19 x 10, or 20 x 8 electric prop
Blazing Star Electric Standard EXTRA LONG Standoff
12 S (x2 6S) 3000-3700 mAh batteries

 

Spinner

3.5 inch

 

Servos

Qty. 5 standard size servos – 15kg recommended.

 

Servo Arms

Qty. 2 Extreme Flight 1.5 inch single servo arms (tapped 3mm) for ailerons
Qty. 1 Extreme Flight 2 inch single servo arms (tapped for 3mm) for elevator
Qty. 1 Extreme Flight 3 inch double servo arm (tapped for 3mm) for pull-pull rudder

 

Servo Extensions

Qty. 4 Extreme Flight 20 AWG 6″ servo extensions for ailerons
Qty. 1 Extreme Flight 20 AWG 24″ servo extensions for elevator
Qty. 1 Extreme Flight 20 AWG 12″ servo extension for throttle servo or ESC

Reviews

There are no reviews yet.

Be the first to review “74″ Slick 580 EXP”

Your email address will not be published. Required fields are marked *